4900 Molly Pitcher Highway
Chambersburg, PA 17202 US
Contact Us

Troy-Bilt 5611 JUNIOR IV OPC (4HP) (S/N M0075090-M0100969) Main Drive Shaft & Gear Assembly

Change Assembly
Diagrams Shown are for U.S. Models

Main Drive Shaft & Gear Assembly

Prices shown are USD

Ref#
 Part
Price
Qty
 
1
KIT-BRG CONE&RACE-DRIVESHAFT (FRT OF DRV SHFT)
$38.89
2
GEAR-SPUR 30 TEETH
$32.37
3
KEY-.188 SQX1.0
$3.64
4
KIT-DRIVESHAFT INERTIA WELDED SHAFT W/ WELDED, SINGLE-LEAD HARDENED STEEL WORM AT FRONT TO DRIVE THE WHEEL WORM GEAR, AND WELDED SIX-LEAD HARDENED STEEL WORM AT REAR TO DRIVE THE TILLER GEAR (ALSO INCL PRESSED-ON #1714 REAR ROLLER BEARING, RACE FOR BEARING, AND #9301
5
SHIM-1.75X1.5X.01 SHIM BETWEEN DRIVE SHAFT REAR BEARING AND REAR BEARING CAP TO ACHIEVE 5-TO- 10 THOUSANDTHS OF AN INCH (.005"-.010") END PLAY ON DRIVE SHAFT.
$4.06
5
BLADE-23"X5 SHIM BETWEEN DRIVE SHAFT REAR BEARING AND REAR BEARING CAP TO ACHIEVE 5-TO- 10 THOUSANDTHS OF AN INCH (.005"-.010") END PLAY ON DRIVE SHAFT.
$28.59
5
SHIM-1.75X1.5X.005 SHIM BETWEEN DRIVE SHAFT REAR BEARING AND REAR BEARING CAP TO ACHIEVE 5-TO- 10 THOUSANDTHS OF AN INCH (.005"-.010") END PLAY ON DRIVE SHAFT.
$4.06
 
SHIM SET-DRIVESHAFT-HORSE INCLUDES THE FOLLOWING SHIMS: 2 #1224-1; 2 #1224-2: 1 #1224-3.
$13.16
6
SCR-HH 5/16-24X.75 G5 ZP
$4.10
7
WASHER-.827X.331X.098 (CONCAVE SDE FACES PLLY)
$5.99
8
KEY-.188 SQX1.0
$3.64
9
PULLEY-TRANS MACH 2 GROOVES (ONE FOR FWD, ONE FOR REV. SPEED)
10
WASHER # .875 X .65 X .06
$4.36
11
SEAL-PINION SHAFT PT/85030/00
$8.88
12
RING-RETAIN EXT .707 ID
$3.55
13
WASHER-1.022X.752X .059
$5.83
14
BUSHING-1.24X.75X1.8 GRVD
$31.17
15
SCR-SS 5/16-18X.375
$3.43
16
SHAFT-PINION(P-V)
$64.91
17
GEAR-PINION P/M
$19.16
18
RING-BOWED EXT .461 ID
$6.06
19
PINION W/GEAR&SNAP RING INCL #20791 INPUT PINION SHAFT, #20792 GEAR, & #9093 RETAINING RING.
 
OIL (SAE 140WT. TILLER GEAR LUBE, 2 QT.)
$17.45
 
OIL (SAE 140WT. TILLER GEAR LUBE, 1 QT.)